Home > Accessories > Controls & Monitoring > Power Load Monitors >

Emotron M20 Shaft Power Load Monitor, 100-240V, 1 & 3 Phase

Emotron M20 Shaft Power Load Monitor, 100-240V, 1 & 3 Phase
Representative Image Only
 
The Emotron power shaft monitors provide a simple, cost effective, state-of-the-art method to monitor pump and system problems and alarm or shut down the pump when a change of load is detected at the motor.  They are applicable to positive displacement or centrifugal pumps, as well as other types of motor-driven equipment.  They are especially useful for pumps which are susceptible to damage due to dry running, such as sealless magnetic drive pumps.
The M-20 can detect both underload and overload conditions.  The monitors are capable of handling both 50 and 60 Hz power, single or three phase, on loads up to 999 HP.

*Note: The power load monitor should not be used as exclusive protection in case of sudden discharge line blockage on positive displacement pumps.  Other means of protection such as a pressure relief valve must be used in conjunction with the power load monitor to avoid pressure spikes in the system.

Starting at...
Our Price: $700.00


Quantity in Stock:1
Availability: Usually Ships in 24 Hours
Product Code: 01-2520-20

Transformer

No Transformer (I already have)
0.4 - 10 Amp #01-2471-10 [Add $55.00]
11- 25.0 Amp #01-2471-20 [Add $55.00]
26 - 50 Amp #01-2471-30 [Add $55.00]
51 - 100 Amp #01-2471-40 [Add $55.00]

Qty:
Description
 
M20 Detects underload and overload conditions.
Specifications
Supply Voltage: 1-phase 100-240V, 3-phase 100-240V
Mointing: 35mm DIN-rail 46277
Approved to: UL, CE (up to 690V), cUL
Startup Delay: 1-999 Seconds
Reponse Delay: 0.1-90 Seconds
Downloads:
Data Sheet
Manual

Share your knowledge of this product with other customers... Be the first to write a review