Shop by Manufacturer
For Special Promos Join Our Mailing List!

  Home > Controls > Power Load Monitors >

  Viking M10 Power Load Monitor
 



 
The Viking Power load monitors provide a simple, cost effective, state-of-the-art method to monitor pump and system problems and alarm or shut down the pump when a change of load is detected at the motor.  They are applicable to positive displacement or centrifugal pumps, as well as other types of motor-driven equipment.  They are especially useful for pumps which are susceptible to damage due to dry running, such as sealless magnetic drive pumps.

The M-10 monitors can be set to detect either an underload condition (indicating dry running or cavitation) or an overload condition (indicating overpressure* situations).  The M-20 can detect both underload and overload conditions.  The monitors are capable of handling both 50 and 60 Hz power, single or three phase, on loads up to 999 HP.

*Note: The power load monitor should not be used as exclusive protection in case of sudden discharge line blockage on positive displacement pumps.  Other means of protection such as a pressure relief valve must be used in conjunction with the power load monitor to avoid pressure spikes in the system.

Starting at...

Our Price: $494.87


Quantity in Stock:1
Availability: Usually Ships in 24 Hours
Product Code: 2-E90-015-999-00

Transformer

No Transformer (I already have)
0.4 - 10.0 Amp #2-E90-018-999-00 [Add $64.00]
10.1 - 25.0 Amp #2-E90-019-999-00 [Add $64.00]
26.0 - 50.0 Amp #2-E90-020-999-00 [Add $64.00]
51.0 - 100.0 Amp #2-E90-021-999-00 [Add $64.00]

Qty:  
Description
 
M10 Detects underload or overload conditions.

Specifications
Supply Voltage: 1-phase 100-240V, 3-phase 100-600V
Mointing: 35mm DIN-rail 46277
Approved to: UL, CE (up to 690V), cUL
Startup Delay: 1-64 Seconds
Reponse Delay: 0.05-64 Seconds

Downloads:
Brochure
Manual

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Controls > Power Load Monitors


Yamada K15-MT Repair Kit, Wet End, Teflon $125.40
Master Pneumatic A33-82 FRL Bracket Kit $4.63
Sethco P90H-40K Drum Pump, PVDF, 40" $671.65
Paco K05017547B Shaft Sleeve, Bronze, Grundfos #91843842 $62.70
Yamada K20-MT Repair Kit, Wet End, Teflon $255.55
Yamada K10-PT Repair Kit, Wet End, Teflon $85.50
Yamada K25-MT Repair Kit, Wet End, Teflon $321.10
Yamada K15-VT Repair Kit, Wet End, Teflon $95.00
Yamada K40-MT Repair Kit, Wet End, Teflon $552.90